Chamfered Structural Heads

These units contain a post-tensioned stainless steel element. They will support loads as indicated in the table. It is essential that this loads is in one direction and that the head is laid so that the orientation is correct.

Additional requirement:

• The maximum lengths shown cannot be exceeded
• Structural Heads cannot be CUT, GROUND, DRILLED or CHASED under any circumstances under any circumstances. Please advise of special requirements at the time of ordering as these may be accomodated in the casting process.
• Structural Heads must be installed with the top uppermost.
• Structural Heads must be used wit a 150mm bearing.

The 125mm thick Structural Heads (RSH1, 2 and 5) are for use with render.

Please allow an extra 2 weeks for Structural Heads above standard availability for full curing to take place.

All Cast Stone products are UKCA/CE marked where appropriate.

Please contact our team for Declaration of Performance. Email [email protected]

Get in Touch

To speak to a member of our sales team call 0333 234 3434 - opt.1, opt. 3, or send an enquiry.